![[home]](../Media/nv-home.gif){kind=small}
![[news]](../Media/nv-news.gif){kind=small}
![[products]](../Media/nv-prod.gif){kind=small}
![[support]](../Media/nv-supp.gif){kind=small}
![[parts]](../Media/nv-parts.gif){kind=small}
![[patterns]](../Media/nv-pats.gif){kind=small}
![[training]](../Media/nv-train.gif){kind=small}
![[jobs]](../Media/nv-jobs.gif){kind=small}
![[locations]](../Media/nv-locs.gif){kind=small}
Copyright 1998-1999 Gribetz International. Last modified:
Welcome to the Global Systems Group Technical Training page. In order to operate and maintain your Gribetz quilter to its maximum capability, we highly recommend your operator and/or maintenance person participate in our in-depth training program.
We have developed several instructional and operational courses to provide the trainee with knowledge pertaining to various subjects and hands-on application of that knowledge. Please take the time to review the coursework offered in our training seminars, and then select the course(s) that applies to your level and needs.
The training seminars offered are as follows:
All training courses outlined are offered during set schedules throughout the year. Each course begins at 9:00am and ends between 4:00pm and 5:00pm. Please reference the training schedule for available courses and dates.
** Please note there is no time allotted for training during the installation and set-up of a machine.
If the coursework you are interested in is not provided for in the previously listed itineraries, please indicate "custom course" on the web form or contact the Technical Training Center to discuss a customized training session. These sessions may be scheduled in-house or on-sight.
Courses are filled on a first come-first serve basis with a maximum of (6) trainees per session. All courses are subject to change and/or cancellation. To enroll in a training course, please complete the web form and submit the request as possible. Please allow for 30 days advance notice for all training courses.
Trainees are responsible for the cost of all travel, lodging, and meals. Once your application form has been received, a Technical Training Center representative will contact you to assist with travel arrangements and hotel reservations.
During the course, training manuals as well as operational manuals are used as reference books. The operational manuals used during the training session are on loan to the trainees during the course and must be returned to the instructor at the close of the session. These manuals are the same manuals included with the original machine shipment. If the trainee wishes to keep the manuals used during the training session, they may purchase additional copies at a 5% discount on the first day of the session. This option will be presented to the trainees by the instructor along with an order form for the manuals. Manuals range in price from $10.00 to $29.00 per manual.
If you require the assistance of an interpreter, there will be an additional charge. Please indicate the language you prefer on the application form.
Trainees should wear comfortable, casual clothing. Long pants and covered shoes are required. No shorts or sandals, please.
For additional information about the Training Center or for expanded course itineraries, please contact the Global Systems Group Technical Training Center at (954)846-0300 or by e-mail to: training@gribetz.com
This course has been developed for the first time operator and/or mechanic with little or no prior quilting experience. Students should possess moderate mechanical knowledge and ability. The Chainstitch 101 course is designed to provide a general overview of chainstitch sewing concepts. Students will train on a Paragon4 quilter in the Technical Training Center. However, the subjects and applications reviewed are applicable to most computerized chainstitch machines.
DAY 1:
DAY 2:
SUPPLIES FEE: $50.00
** once Basic has been completed, trainee has the option to attend the INTERMEDIATE session which will immediately follow.
CHAINSTITCH 201- INTERMEDIATE E/PARAGON SERIES
MULTI-NEEDLE COURSE
This course is offered to operators and/or mechanics with moderate quilting experience. Students should be skilled in mechanical applications and knowledgeable of general chainstitch sewing concepts. Some computer experience is also recommended. The length of the course is 3 full days. Although much of the information conveyed during Day 1 of the course is applicable to most computerized chainstitch machines, the Chainstitch 201 course is designed to provide an in-depth study of e, e Plus and Paragon chainstitch sewing concepts and operation. Students will train on a Paragon4 quilter in theTechnical Training Center.
DAY 1:
• Review of Basic Operational Safety
• Review of Parts In Motion: What are they and how do they work?
•
Hands-on Application
•
Synchronization of Sewing Box
•
Daily Checklist Review
DAY 2:
•
Preventive Maintenance
•
Re-emphasis of Safety Precautions
•
Point & Sew Icon Review
•
What is a product?
•
Product ID Function Review w/manual
•
Daily Checklist Review
DAY 3:
•
Hands-on Operation of Quilter utilizing Point & Sew Software
•
Safety Precautions
•
Producing Products - Assignment
•
General Introduction to Batch Mode
•
Basic Trouble-shooting & Hands-on Operation
•
Modeming and Back-up
•
Daily Checklist Review
SUPPLIES FEE: $75.00
This course is recommended for supervisors and/or operators experienced with the e, e Plus and Paragon series machines. This course will cover the operation of the programmable panel cutter in conjunction with product schedule/batch mode operation. Students must have completed the Chainstitch 201 course or have been operating an e, e Plus or Paragon series machine for a minimum of 2 months. Moderate computer experience is recommended. Students will train on a Paragon4 quilter and Programmable Panel Cutter in the Technical Training Center. This is a full 4 day course.
Please note this course focuses on computer and operator interface training. There is very little mechanical information conveyed.
DAY 1:
DAY 2:
DAY 3:
DAY 4:
SUPPLIES FEE: $100.00
This course will be offered to operators and mechanics with moderate quilting experience. Students should be skilled in mechanical applications and knowledgeable of general quilting/sewing concepts. The length of the course is 3 full days, and courses are scheduled on an individual basis.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1:
DAY 2:
DAY 3:
SUPPLIES FEE: $75.00
This course will be offered to mechanics with little or no quilting experience. This course has been developed to provide maintenance personnel with the necessary mechanical knowledge needed to perform the required preventive maintenance, problem diagnosis and trouble-shooting, as well as instruction on safe operating practices. The length of the course is 4 full days. Courses are scheduled on an individual basis.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1:
DAY 2:
DAY 3:
DAY 4:
SUPPLIES FEE: $100.00
This course will be offered to operators and mechanics with moderate quilting experience. Students should be skilled in mechanical applications and knowledgeable of general quilting/sewing concepts. The length of the course is 3 full days. Courses are scheduled on an individual basis.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1:
DAY 2:
SUPPLIES FEE: $75.00
This 2 1/2 day course is offered to and required of customers who have purchased the PDS software. Topics covered during the training course include: AutoSketch Instruction, Creating Continuous and Tack & Jump Patterns, Needle Setting Codes, etc. It is recommended students attending this course be computer literate and have some quilting knowledge.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1 (AM):
DAY 1 (PM):
DAY 1 (PM):
DAY 2 (AM):
DAY 2 (PM):
DAY 3 (AM):
SUPPLIES FEE: $62.50
This course is designed to accommodate all personnel who may be involved with the CCQ equipment. It is a full three day course divided into (2) separate sections.
Day 1 has been developed to educate operators, mechanics, supervisors, pattern developers, etc. on the basic day-to-day operation of the equipment. Day 2 and 3 involves more extensive mechanical, electrical, and troubleshooting instruction, and it is recommended only for personnel who will be directly involved in the maintenance and operation of the equipment.
Day 1 is required of all persons attending training for the CCQ machine. However during Day 2 and Day 3, individuals have the option to continue on with the extensive machinery training or to attend the CPDS training course. Courses are scheduled on an individual basis.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1:
- startup procedure
- loading/unloading products
- computer screens/menus
- operator interface
- shutdown procedure
DAY 2:
DAY 3:
SUPPLIES FEE: $75.00
** a second session of the CPDS training course will be offered the (2) days following the completion of the course listed above for those who wish to attend all (3) phases of training for the CCQ machine: Basic, Extensive, and CPDS.
This 2 day training course is offered to and required of customers who have purchased the CPDS software. Before attending this course, it is required all personnel attend Day 1 of the Single-needle Operational Training Course. It is recommended students attending this course be computer literate and have some quilting knowledge. Courses are scheduled on an individual basis.
** Please contact the Global Systems Group Technical Training Center for the next available course.
DAY 1 (AM):
DAY 1 (PM):
DAY 2 (AM):
DAY 2 (PM):
SUPPLIES FEE: $50.00
Copyright 1998-1999 Gribetz International. Last modified: